|
Pages: 1 2 3 4 5 6 7 8 [«Back ||Next »] |
|
|
|
Product Code: PHY-131
Set comprises 20g hanger with three masses each of 20g. one of 10g, two of 5gm each, brass plated total 100g.
|
|
|
|
|
Product Code: PHY-132
Plastic body, rectangular shape, metal scale, with zero adjuster, suspension ring and load hook. Set comprises 50g hanger with 9 masses each of 20g. one of 10g, two of 5g. each, brass plated, total 250g.
|
|
|
|
|
Product Code: PHY-133
Set comprises 1 kg hanger, 4 slotted masses of 1kg each, stove enamelled total 5 kg.
|
|
|
|
|
Product Code: PHY-134
A heavy metal body knurled zero adjusting knob; strong plated steel hanger and load hook. |
PHY-134.1 |
20g |
PHY-134.2 |
50g |
PHY-134.3 |
100g |
|
|
|
|
|
Product Code: PHY-135
Brass plated, with loop on one side and hook on the other side. |
PHY-135.1 |
10g |
PHY-135.2 |
20g |
PHY-135.3 |
50g |
PHY-135.4 |
100g |
|
|
|
|
|
Product Code: PHY-136
Made of wood, 300 mm long, metal reinforced ends, three low-loss ball-bearing wheels and fitted with spring loaded impulse rod. Rod has three positions to provide different impulses and is triggered by a release pin. Four removable metal legs to enable stacking of trolleys.
|
|
|
|
|
Product Code: PHY-137
|
|
|
|
|
Product Code: PHY-138
Ticker tape, width 9 mm, in rolls approximately 300 meter long.
|
|
|
|
|
Product Code: PHY-139
The timer employs electromagnet, with spring loaded armature which vibrates above a support table for a carbon paper disc. Paper tape, drawn through guides on the table, is struck by a dotting screw carried on the armature. The peg on the support table is movable to allow maximum use of carbon paper discs. The ticker tape timer produces dots spaced at 1/50 or 1/60s intervals depending on main frequency. Operates on 12 V a.c. with Power supply and paper roll.
|
|
|
|
|
Product Code: PHY-140
Metallic bar of 25 cm length, discs at the ends are screwed and can be removed. Split chuck for clamping can be screwed in the middle of the bar .
|
|
|
|
|
Product Code: PHY-141
Inclined wood plane, 600 x 75 mm, hinged to base at one end carries a pulley at the other. A movable block enables variation of inclination of plane, a friction slide of size 100 x 65 mm which is reversible and has one side cut away for half of its area. Complete with metal roller 75 x 25 mm dia, with pan but without masses.
|
|
|
|
|
Product Code: PHY-142
Inclined wood plane 600 x 75 mm with pulley at one end, the other being hinged to wood base. A metal
linear scale is fixed to edge of plane and a vertical, linear and an angular 0-45° scale is fixed to base,
with a clamp which also serves as an index. Supplied with metal roller 75 x 25 mm length x dia a
wooden block and a scale pan with cord.
|
|
|
|
|
Product Code: PHY-143
Comprising of two metal trays 130 x 55 x 23 mm are joined together with two spring steel strips of 10 mm width, the distance between the trays being 215 mm. One tray is drilled to accept 3 equal cylindrical masses. The other tray can be clamped to a bench horizontally or vertically. Complete with 3 masses and a ‘G’ Clamp.
|
|
|
|
|
Product Code: PHY-144
Comprising a solid sphere with a small ring of suspension. Available in three sizes as listed below. |
|
|
Dia in mm. |
PHY-144.1 |
Lead |
13 |
PHY-144.2 |
Lead |
19 |
PHY-144.3 |
Lead |
25 |
PHY-144.4 |
Brass |
13 |
PHY-144.5 |
Brass |
19 |
PHY-144.6 |
Brass |
25 |
PHY-144.7 |
Steel |
13 |
PHY-144.8 |
Steel |
19 |
PHY-144.9 |
Steel |
25 |
|
|
|
|
|
Product Code: PHY-145
Metallic bar 1000 x 19 x 6 mm with holes at every 50 mm along the centre line. For the suspension of the bar, a steel knife edge is mounted in a wall bracket.
|
|
|
|