| |
| Pages: 1 2 3 4 5 6 7 8 [«Back ||Next »] |
| |
|
|
|
Product Code: PHY-146
Made of cast iron about 20 cms in dia by 35 mm wide turned and carefully balanced, mounted on a horizontal shaft held in ball bearings. The wheel is marked and pointer is fixed to the bracket. The bracket can be fixed to the wall also.
|
|
| |
|
|
|
Product Code: PHY-147
Consists of a 12 cm adjustable mirror scale mounted on a support, an adjustable hook and a spring
with a weight hanger are attached to the top of the rod. Supplied without masses.
|
|
| |
|
|
|
Product Code: PHY-148
Consisting of two metallic brackets are held together with connected rods. A heavy metallic pulley mounted on one bracket & is fitted with a three jaw chuck to hold one end of the test rod, the other end being held in other chuck fixed to the other bracket. Two graduated scales are mounted on the connecting rod & two pointers can be clamped in any desired position on the test rod, with one brass & one steel test rod but without masses.
|
|
| |
|
|
|
Product Code: PHY-149
The Instrument consisting of two frames connected by a link. which also carries a spirit level. A micrometer head reading to 0.01 mm is provided to re-adjust the spirit level. With two self centering wire pin chucks, a ceiling bracket also with two pin chucks, a counterpoise weight and supply of suitable wires and slotted masses.
|
|
| |
|
|
|
Product Code: PHY-150
| Spherical pattern, adjusted light blown glass available in neutral and Borosilicate glass, with flat bottom
and perforated stopper. Capacity in Ml. |
| |
|
Capacity |
| PHY-150.1 |
Neutral Glass |
25 Ml |
| PHY-150.2 |
Neutral Glass |
50 Ml |
| PHY-150.3 |
Borosilicate Glass |
25 Ml |
| PHY-150.4 |
Borosilicate Glass |
50 Ml |
|
|
| |
|
|
|
Product Code: PHY-151
100 mm dial scale 960 to 1060 mb (28-31 in x 0.1 in). Movement mounted in a sturdy frame with glass in
anodised bezel with lug for rear mounting.
|
|
| |
|
|
|
Product Code: PHY-152
A 6 mm glass tube contained in an brass case, mounted on a polished wooden board with plates for fixing to wall, open plate reflectors and ring and screws for vertical adjustment. The silvered scales, graduated in inches and mm are read by vernier moving by Rack and Pinion to 1/200 in and 1/10 mm and are enclosed in glass cylinder. A glass cylinder at the lower end of the Barometer is provided with an ivory point to which the level of the mercury in the cistern is adjusted before readings are taken. Fitted with thermometer with centigrade and Fahrenheit scale. Supplied without mercury.
|
|
| |
|
|
|
Product Code: PHY-153
|
|
| |
|
|
|
Product Code: PHY-154
For Fortin’s barometer made of wood nicely polished with three sides glass panels.
|
|
| |
|
|
|
Product Code: PHY-155
Comprising three limbed glass tube mounted on polished wooden stand with scale in cm and mm. Two metal sliding distance rods may be so adjusted that their lower ends just touch the surface of the liquid under experiment to facilitate column height readings.
|
|
| |
|
|
|
Product Code: PHY-156
Two glass tubes 220 mm long, one is closed at the top and other one is open and connected by 1 Meter pressure rubber tubing. Both the tubes are mounted on the brackets which can be locked in any portion on the metal supporting rods. Stand carries a graduated scale 0 to 100 cm.Mercury required for this 3 apparatus is approx.30 cm.Supplied without mercury.
|
|
| |
|
|
|
Product Code: PHY-157
|
|
| |
|
|
|
Product Code: PHY-158
Glass model, with visible valves. 350 mm height working model .
|
|
| |
|
|
|
Product Code: PHY-159
Made of glass, working model with visible valves, mounted on wooden stand.
|
|
| |
|
|
|
Product Code: PHY-160
Glass tube with plunger having a bulb at the bottom. The bulb has holes around its circumference and glass piston .The jet of the liquids from the orifices at different heights of the container demonstrate the characteristics of the pressure exerted by a liquid on the walls of its container.
|
|
| |
|
