HomeAbout UsproductEnquiryContact Us
 
 
 
 

Electronics

Pages: 1 2 3 4 5 6 [«Back ||Next »]
   

FET CHARACTERISTICS APPARATUS

Product Code: PHY-426

Fitted in a painted case, with three meters, to study and plot output and mutual characteristics of a FET.


   

SEMICONDUCTOR DIODE/PN JUNCTION DIODE CHARACTERISTICS APPARATUS

Product Code: PHY-427
Fitted in a painted case, with power supply and two meters, suitable for both forward and reverse bias characteristics.

   

ZENER DIODE CHARACTERISTICS APPARATUS

Product Code: PHY-428
Fitted in a painted case, with two meters for measuring input voltage and output voltage, complete with built in power supply.

   

THERMISTOR CHARACTERISTICS APPARATUS

Product Code: PHY-429
Study of thermistor as temperature measuring transducer electrically heated oven up-to 90ºC Thermistor (NTC) mounted in metallic tubing and protected from corrosion. Study of non-linear (exponential) characteristics Unbalance Bridge circuit with 1st degree linearization Differential gain amplifier 3.5 digit DPM as temperature scale Glass thermometer for reference Detailed instruction manual.

   

LCR IMPEDANCE APPARATUS

Product Code: PHY-430
Fitted in a painted case, with three resistance, three capacitors, inductance and two meters to read voltage and current for series and parallel resonance circuits.

   

LOGIC GATES TRAINER

Product Code: PHY-431
Fitted in a elegantly painted case, logic gates trainer is a self training course in basic digital electronic and is first step to understand fundamentals of any computer, It enables the student to understand AND, OR, NOT, NAND and NOR Gates and in the process to make connections.

   

ELECTRONIC KIT SENIOR

Product Code: PHY-432
The electronic kit senior is a kit designed keeping in view the requirement of today student who is very enthusiest regarding electronic projects. With this kit, one can make number of electronic circuits such as decade counter, shift register, display, uses of various gates in different applications, flip-flops, application of various operational amplifiers etc. Housed in a very rugged easy carry housing. It is self contained bit as it provides all the components required for performing experiments as per illustrations of the comprehensive manual.

   

AUDIO FREQUENCY FUNCTION GENERATOR 1Hz TO 220 Hz

Product Code: PHY-433
Wave Shapes Sine, Square, and Triangular waves selectable by band switch.
Frequency Range 1 Hz to 220 KHz using fine and coarse controls.
Accuracy ±3% on all ranges.
Outputs Impedance App. 60 Ohms
Amplitude for sine 20 V Peak to Peak wave output.

   

OSCILLATOR SINE/SQUARE1 Hz -1MHz

Product Code: PHY-434
Wave Shapes Sine, Square wave output 4 mm sockets.
Frequency Range 1 Hz to 1MHz using fine and coarse controls.
Accuracy ±5% on all ranges.
Amplitude for sine wave output 30 V peak to peak
Amplitude for square wave output 15 V peak to peak
Output Impedance for sine wave App. 600 Ohms
Output Impedance for square wave App. 400 Ohms

   

OSCILLOSCOPE, SINGLE TRACE

Product Code: PHY-435
Fully solid state workable on 220 volts 50 Hz. All supplies are stabilised for accurate and stable operation. Single beam with a band width DC to 10 MHz. The accurate triggering of time base enable clear and stable display on screen 8 x 8 cm. Vertical deflection can be selected for either A.C. or D.C. provision for attenuation in the input circuit, calibrated from 5 mV to 50 V/cm.
Band width Vertical D.C. to 10 MHz (3db)
Sensitivity 10mV/Cm Maximum
Input Impedance 1M Ohm
Square wave calibration 2VP-P
Triggering Internal from vertical amplifier or external.
Sweep Time Factor 0.1 us/Div. 0.1s/div +5%

   

OSCILLOSCOPE, DUAL TRACE, 20 MHz

Product Code: PHY-436
It is a 20 MHz Dual Channel Oscilloscope ideal for proffectionals as well as students undergoing technical studies. It is rugged,light weight instrument that features a bright, sharply defined trace on a 80 by 100 mm cathode ray tube.The internal trigger signal is ac coupled. An external triggering signal or an external Z-axis modulation signal can be applied via a front panel or rear panel connector and the source selector switch. The horizontal system provides calibration sweep speeds from 0.2s to 0.1 Micro S division. for greater measurement accuracy a x5 magnifier circuit extends the maximum sweep speed to 20 ns per division.SPECIAL FEATURES Syncronisation of the signals from the two channels can be identified by a red LED marked as READY present on the right hand side top on the front panel
Frequency Bandwidth DC-20 MH
Deflection Factor 5 mV/div-10V x div x5
Sweep Factor 0.2s-0.1s/div. + 5%
Trigger syncronization Int,Alt,line,Ext.TV
Vertical Type CH1,CH2,Alt,Chop
Sweep Mode Auto, Trigger,Single Time

   

ACCUMULATOR

Product Code: PHY-437
In transparent polystyrene container with terminals.
PHY-453.1 2 Volt 20 Amphr
PHY-453.2 2 Volt 30 Amphr

   

ACCUMULATOR

Product Code: PHY-438
In plastic container, mass type rating at slow discharge. With terminals.
PHY-454.1 2 Volt 20 Amphr
PHY-454.2 2 Volt 40 Amphr

   

BATTERY HYDROMETER

Product Code: PHY-440
To measure the density of electrolyte in lead acid cells, a hydrometer float is contained in a glass body which is provided with a compressible rubber bulb and a nozzle

   

BATTERY ELIMINATOR

Product Code: PHY-442
Workable on 220 V 50 Hz, Housed in steel cabinet. Socket or Band-Switch provided for Selection of Volts output, with ON/OFF switch and main indication. Output: 2, 4, 6, 8, 10, and 12 V D.C.
  Output current
PHY-442.1 1 Amp.
PHY-442.2 2 Amp.
PHY-442.3 3 Amp.
PHY-442.4 4 Amp.
PHY-442.5 5 Amp.

   

 
Home|About Us|Products|Enquiry|Contact Us
Copyright © 2009 Lotus Overseas & Marketing (India) - All Rights Reserved.